Flame Resistance Coating FireGuard E-84

Description

Water-based intumescent coating designed for the fire protection of structural steel. Thin film intumescent coating that creates a fire retardant and fire resistant barrier on a wide range of building surfaces including gypsum, wood, and steel.

Features

• ASTM E-119, ASTM E-84 Tested
• Decorative finish-gives a smooth decorative finish
• Can be top coated to color choice
• Smooth/Flat surface
• Durable finish-provides a hard, impact and abrasion resistant surface
• Topcoat finishes smooth
• Thin film coating-space saving smaller column footprints
• Low VOC content
• LEED Compliant

Color

• White

Primers

• Must be applied over a compatible primer (Alkyd, Epoxy). Generally not recommended for primers with zinc metals

Top Coating

• For interior conditioned space a topcoat is optional. For exterior applications the material must be top coated with an impermable exterior coating. The choice of topcoat will depend on project requirement. Fireguard E-84 intumescent coating must be allowed to cure for 4-5 days prior to the application of a topcoat. Application must be protected from the elements until topcoat is in place

Wet Film Thickness

• Up to 25-30 mils per coat

Dry Film Thickness

• Up to 13.5 – 16.2 mils per coat

Solid Content

• By volume 54%

VOC Content

• 3.6 g/l

Specifications

Color	White
Wet Width	25 – 30 mils/layer
Dry Width	13.5 – 16.2 mils/layer
Solid Rate	~ 54%
Coverage	866ft²/ Gal / 1 mil 86ft²/ Gal / 10mil 28.9ft²/ Gal / 30mil
VOC	3.6 g/l
Standard	Contact us
Package	5 Gallon (18,92 Lít) / 55 Gallon (208,1 Lít) / 1 Tote (~275 Gallon ~ 1040 Lít)