PREMIUM ELASTOMERIC TOPCOAT ELASTEK 129

Description

E-las-tek® #129 PolyTek Pro is a reflective elastomeric roof coating made with acrylic polymers. Applied correctly, it forms a flexible, sustainable skin that can dramatically lengthen the life of a roof by protecting it from solar damage. With its high solar reflectivity, roofs stay cooler, reducing stress on the roof system and often leading to a significant reduction in cooling costs. Because of its extreme water resistance and reflectivity, #129 PolyTek Pro is a superior choice for low slope roofs and hot-weather conditions.

Color: Bright White

ADVANTAGE:

• Acrylic polymers of exceptional durability
• Forms durable membrane that reflects most of the sun’s heat
• Provides outstanding resistance to UV degradation
• Preserves asphalt-based roofing materials
• Expands and contracts with thermal changes to keep the roof surface sealed over time
• Adheres well on a wide variety of substrates
• Good resistance to abrasion
• Resistant to asphalt staining
• Ideal for all low-pitch roofs
• Resistant to moderate ponding water — NRCA states ponding past 48 hours should be eliminated
• Long- lasting
• Great for coating new spray polyurethane foam
• Easy-to-apply with brush, spray, or roller
• Environmentally safe

LIQUID APPLIED ROOFING:

• Concrete
• Steel
• Galvanized sheet metallic
• Foam

SURFACES NOT SUITABLE FOR COATING:

Worn-out or water-saturated roofs of any type, tile, shingles, and surfaces treated with adhesion-resistant materials such as silicone or Kynar

WEATHER CONDITIONS:

Application of E-las-tek® #129 PolyTek Pro top coat can be applied when the ambient temperature is a minimum 50°F and rising in weather conditions where the temperature during the cure cycle (24-48 hours) will not fall below 32°F. The acrylic top coat should not be applied when moisture is present on the roof surface. The roof surface temperature range for application should be between 40°F – 115°F. The service temperature range for the respective top coat can vary between -35°F – 180°F.

SURFACE PREPARATION:

All surfaces must be thoroughly cleaned to remove oils, gravel, granules, loose coating, chalk, dirt, rust, corrosion, mildew, efflorescence, and bond-breakers to assure coating adhesion and minimize asphalt bleed. Clean with a broom and TSP or TSP substitute/water solution (or pressure wash); rinse well; allow to dry thoroughly. Rust/corrosion may require wire brush and scraping. Roof system must be free of moisture before coating. Prime asphalt surfaces with Elastek #120 High-Tek Basecoat prior to system application.

APPROVALS:

Class A Fire Rated per UL790/ASTM E-108-07a

CRRC/ Energy Star Listed

Title 24 Compliant

APPLICATION:

See WEATHER CONDITIONS below for ideal conditions. Wear protective clothing and eye protection. Apply by roller, spray, or brush with minimum of working. Pre-coat repairs, uncoated areas, and areas needing more protection, and allow to dry

A 1-1/4-inch paint roller is best for dipping coating from the pail. A ½-inch nap cover gives very smooth application when coating is poured onto roof surface, then spread.

Apply coats at 90- degree-angle to ensure even coverage

Coatings are sensitive to standing moisture for up to 48 hours after application.

Can be spray-applied by airless pump capable of 2-3000 PSI, 1-3 GPM using a 6-31 or 8-31 reversible tip.

DO NOT DILUTE

COATING THICKNESS DETERMINES SERVICE LIFE

Clean tools promptly with water.

COVERAGE:

Coverage varies with the porosity of the substrate. Apply at 80-100 sq. ft. per gallon per coat.

Recommend two or more topcoats, totaling 20+ mils dry for long-term durability

SAFETY:

Use in areas with good ventilation. Keep containers tightly closed when not in use. Keep away from children. Store in cool, dry place. Prevent from freezing.

Specifications

Reviews (0)